REXLINE PRODUCT SUPPLY CAPABILITY
Rexline Rollers & Idlers
STEEL ROLLER
STEEL ROLLER
Rexrollers is the competitive standard for belt conveyor. the idler is used as a carrying Roller and also as a return Roller for non-sticky materials. The steel sealed shell and waterproof seal from a reliable splash protection. Multiple seals effectively prevent dust from entering the inside of the drum. The surface of the drum is shot blasted and covered with viscous materials. You can carry our special treatment surface.
Dimensions (mm)
- L1: 150-2500 Customize
- D: 76,89,102,108,114,127,133,159 Customize
- d: 15,20,25,30 Customize
- H: 2-8 Customize
ROLLER PARTS
Bearing Housing
Rexrollers is the competitive standard for belt conveyor. the idler is used as a carrying Roller and also as a return Roller for non-sticky materials. The steel sealed shell and waterproof seal from a reliable splash protection. Multiple seals effectively prevent dust from entering the inside of the drum. The surface of the drum is shot blasted and covered with viscous materials. You can carry our special treatment surface.
Bearing
Rexroller Bearing are applying with large clearance, Deep groove ball bearings, which can protect and guarantee the rollers with the ideal static and dynamic balance Bearings either with double dust proof cover or with double Labyrinth ring will ensure rollers running smoothly to the maximum extend. Currently the bearing we used is FAG and SKF or as per required.
Sealing System
Rexroller use the multiple layer seal, and rush into lithium lubricating grease in the seal. The bearing oil loading is about 2/3-3/4 of the bearing clearance, The clearance between the seal rings are fully loaded. This way guarantees the enclosed and the compact endless of the seals and achieved the effectiveness of dust proof, waterproof and the bearing protection.
PACKAGE
Rexrollers roller will be put into the matched plastic bag, then packed in the wooden case, all of the wooden cases will be fumigated before loading to ensure the wooden case comply with the hygienic standard.
Wooden packing
Iron box packing
Packaging
IMPACT ROLLER
Rexroller impact roller to absorb impact shocks at belt conveyor loading points. The impact idler is also suitable for a snub pully for the dirty side of the belt as well as for an impact idler for unit goods conveyors. Impact Roller to base on the sturdy Steel idler roller. By adding rubber support ring to achieve the cushioning effect.
IMPACT IDLER ROLLER
- Small contact area
- Good elasticity
- Good abrasion resistance
- Wide contact surface
- Good wear resistance
- Wide contact surface
- Good wear resistance
- Not easy to move
- Good flexibility
- Impact resistance
- Wide contact surface
- Good elasticity
- Wide contact surface
- Good wear resistance
- Not easy to move
Heat Resistance Conveyor Belt & Fire Resistant Belt
REXLINE ENGINEERED SPECIAL PURPOSE BELT
Rexline Engineering Indonesia has a wide range of options for heavy duty belting products and cover compounds to suit various applications. Our belting solutions are designed to deliver outstanding performance to:- High abrasion resistant belt
- Extreme temperatures continous up yo 500
- Impact resistant belt
- Tear resistant belt
- Cut & gouge resistant belt
- Oils & electric resistant belt
- Chemical resistant belt
- Severe weather condition
RETURN ROLLER
Return roller are designed to support the return belt. The selection of the return idler type is influenced by the strength, stiffness, and weight of the belt.
Return roller are installed on the unloaded branch to support the conveyor belt on the branch. In the common layout the use of V-shaped or reverse V-shaped support in the lower unloaded section is beneficial to restrain the deviation of the conveyor belt.
Besides the rubber disc types A and B return idlers can be equipped with polyurethane discs. Tailor-made support ring assembly types are also available.
Rexrollers are used for belts that are clean and non-sticky. It is also available with rubber lagging (5mm or 10mm) and can be used as an impact roller. They are also used on both sides of the pressing guide bracket and as a counter idler for the cleaner.
GARLAND – ROLLER
Rexrollers roller replace traditional idler and brackets. The idler are connected to each other with flexible links and fixed to the conveyor frame with suspension links which allow free movement in the direction of belt travel.
Rexroller Rollers garland idler roller spread the load over more idler. Thus also the belt profile changes and the belt load becomes steadier. The total quantity of the steel in conveyor frame can often be considerably reduced and the frames simplified.
When conveying heavy item, with the help of garland idlers the pressures against the belt and idlers can be reduced. The life of the belt and idlers increase and thus a better economy is achieved.
Rexrollers provide four different hanging buckles. By lifting the idler set from the hook, the wreath idler set can be easily replaced.
Three-Piece Carrying Garland | ||||
Width Of Conveyor Belt | a | A | H | D |
650-2000 | 35-45 | 930-2500 | 250-730 | 89-194 |
| Three-Piece Carrying Garland | ||||
| Width Of Conveyor Belt | a | A | H | D |
| 650-2000 | 10-15 | 100-2500 | 90-330 | 160-219 |
IDLER ROLLER BRACKET
IDLER ROLLER BRACKET
Rexline Engineering bracket has a good steel structure, which provides a high load-bearing capacity.
The roller is fixed to the bracket by screws or hanging buckles. When the side idler is tilted forward, the Rexline Engineering bracket can stabilized the direction of the belt.
The surface of the bracket is processed by ho-dip galvanizing. Hot-dip galvanizing provides good corrosion protection and does not required any special precautions during transportation and handling.
The main bracket is made of sheet metal and can bear the maximum weight. The narrow shape of the top edge of the mechanism effectively prevents the accumulation of cleaning materials
The main bracket is made of sheet metal and can bear the maximum weight. The narrow shape of the top edge of the mechanism effectively prevents the accumulation of cleaning materials.
Belt Width | 400-2400mm |
Tube Diameter | Ø76- Ø 159 mm |
Tilt Assist | Yes |
Corrosion Protection | Hot dip galvanized |
Belt Width | 400-800mm |
Tube Diameter | Ø76- Ø 133 mm |
Tilt Assist | Yes |
Corrosion Protection | Hot dip galvanized |
Belt Width | 400-2400mm |
Tube Diameter | Ø76- Ø 159 mm |
Tilt Assist | Yes |
Corrosion Protection | Hot dip galvanized |
Belt Width | 400-2400mm |
Tube Diameter | Ø76- Ø 159 mm |
Tilt Assist | Yes |
Corrosion Protection | Hot dip galvanized |
Belt Width | 400-2400mm |
Tube Diameter | Ø76- Ø 159 mm |
Tilt Assist | Yes |
Corrosion Protection | Hot dip galvanized |