Cart Total Items (0)

Cart

2 TON ELECTRIC WINCHES

2 TON ELECTRIC WINCHES TECHNICAL DATA
MODEL2 TON ELECTRIC WINCH MACHINE

 

BASE FRAME

Fabricated with rolled steel section/plates properly ribbed floored with plate for working area with lifting lugs provided.

Weights =850 KG, Frame Size = 1480 mm x 1680 mm IS MB Size = 125mm x 75mm.

 

ROPE DRUM

Drum fabricated with seamless pipe duly machined with flange at both and with roller bearing on both flange.

DRUM CAPACITY:- 200/400 meters, ROPE DIA :- 12/14 mm

 

REDUCER

1st Stage Worm Reduction gears box of NU-Series PEC make.

2nd Stage Reduction with spur gear and pinion (Size of Gear Box) = NU 5. Ratio = 1:40

 

MOTOR

TEFC SQ. Cage 3H.P/5H.P Crane Duty Motor 400/415V, 50Hz, 3PH. Class of insulation F, IP- 55 Protection, S4Duty, CDF 40%. No of Start Stop150 per hour
DRUM & PINION SHAFTMake of EN8 forged steel material.
ROPE SPEED4 – 6 Meters / minutes OR 6-8 meter/min at last layer
BRAKEElectro hydraulically operated Double shoe thruster brake. (Dia of brake:-200mm of Reputed Make)

 

COUPLING

Star coupled on motor shaft and input shaft gear box flexible pin bush coupling on out shaft of gear box and input shaft of pinion.

 

CONTROL

The winch is operated by master control with four Steps forward and reverses in slip ring motor. In squirrel cage motor is operated by reverse forward pendent push button station.

 

CONTROL PANEL

Control panel suitable for motor provided with contactor, overload relay, amp/volt meter, Push Button for on and off, lamp for incoming supply, HRC fused & Step Down Transformer and control panel is weather proof.
PAINTINGTwo coats of red oxide and enamel Paint.

 

SAFETY FEATURES

Hand operated brake for emergency stop provided. Overload tripping system for motor. HRC fuse, Miniature Circuit Breaker & Step Down Transformer for safety of the operating personal and control panel is weather proof.

3 TON ELECTRIC WINCHES

3 TON ELECTRIC WINCHES TECHNICAL DATA
MODEL3 TON ELECTRIC WINCH MACHINE

 

BASE FRAME

Fabricated with rolled steel section/plates properly ribbed floored with plate for working area with lifting lugs provided.

Weight=1000 KG Frame Size = 1800mm x 1524mm IS MB Size = 150mm x 75mm.

 

ROPE DRUM

Drum fabricated with seamless pipe duly machined with flange at both and with roller bearing on both flange.

DRUM CAPACITY:- 300/450 meters, WIRE ROPE :-14mm/ 16mm

 

REDUCER

1st Stage Worm Reduction gears box of NU-Series PEC make 2nd Stage Reduction with spur gear and pinion (Size of Gear Box) = NU 6.

Ratio = 1:40

 

MOTOR

TEFC SQ. Cage 5H.P/7.5H.P Crane Duty Motor 400/415V, 50Hz, 3PH. Class of insulation F, IP- 55 Protection, S4Duty, CDF 40%. No of Start Stop150 per hour
DRUM & PINION SHAFTMake of EN8 forged steel material.
ROPE SPEED4 – 6 Meters / minutes OR 6-8 meters/min. even more
BRAKEElectro hydraulically Double shoe thruster brake. (Dia of brake:-200mm of Reputed Make)

 

COUPLING

Star coupled on motor shaft and input shaft gear box flexible pin bush coupling on out shaft of gear box and input shaft of pinion.

 

CONTROL

The winch is operated by master control with four Steps forward and reverses in slip ring motor. In squirrel cage motor is operated by reverse forward pendent push button station.

 

CONTROL PANEL

Control panel suitable for motor provided with contactor, overload relay, amp/volt meter, Push Button for on and off, lamp for incoming supply, HRC fused & Step Down Transformer and control panel is weather proof.
PAINTINGTwo coats of red oxide and enamel Paint.

 

SAFETY FEATURES

Hand operated brake for emergency stop provided. Overload tripping system for motor. HRC fuse, Miniature Circuit Breaker & Step Down Transformer for safety of the operating personal and control panel is weather proof.

5 TON ELECTRIC WINCHES 

5 TON ELECTRIC WINCHES TECHNICAL DATA
MODEL 5 TON ELECTRIC WINCH MACHINE
  BASE FRAME Fabricated with rolled steel section/plates properly ribbed floored with plate for working area with lifting lugs provided. Weights =1550 KG, Frame Size = 2100 mm x 1800 mm IS MB Size = 200mm x 75mm.
  ROPE DRUM Drum fabricated with seamless pipe duly machined with flange at both and with roller bearing on both flange. DRUM CAPACITY:- 300/500 meters, ROPE DIA :- 16/19 mm
  REDUCER 1st Stage Worm Reduction gears box of NU-Series PEC make. 2nd Stage Reduction with spur gear a nd pinion (Size of Ge ar Box) = NU 7/NU8,. Ratio = 1:40
  MOTOR TEFC SQ. Cage 10H.P/15H.P Crane Duty Motor 400/415V, 50Hz, 3PH. Class of insulation F, IP- 55 Protection, S4Duty, CDF 40%. No of Start Stop 150 per hour-960 RPM————————————— CROMPTON OR BBL MAKE
DRUM & PINION SHAFT Make of EN8 forged steel material.
ROPE SPEED 4 – 6 Meters / minutes OR 6-8 meter/min at last layer
BRAKE Electro hydraulically operated Double shoe thruster brake. (Dia of brake:-200mm of Reputed Make)
  COUPLING Star coupled on motor shaft and input shaft gear box flexible pin bush coupling on out shaft of gear box and input shaft of pinion.
  CONTROL The winch is operated by m aster control with four Ste ps forward and reverses in slip ring motor. In squirrel cage motor is operated by reverse forward pendent push button station.
  CONTROL PANEL Control panel suitable for motor provided with contactor, overload relay, amp/volt meter, Push Button for on and off, lamp for incoming supply, HRC fused & Step Down Trans former and control panel is weather proof.
PAINTING Two coats of red oxide and enamel Paint.
  SAFETY FEATURES Hand oper ated brake for em ergency stop provi ded. Overl oad tripping system for motor. HRC fuse, Miniature Circuit Breaker & Step Down Transformer for safety of the operating personal and control panel is weather proof.

10 TON ELECTRIC WINCHES 

10 TON ELECTRIC WINCHES TECHNICAL DATA
MODEL10 TON ELECTRIC WINCH MACHINE

 

BASE FRAME

Fabricated with rolled steel section/plates properly ribbed floored with plate for working area with lifting lugs provided.

Weight=2200 KG, Frame Size = 2050 mm x 2536 mm IS MB Size = 250mm x 125mm.

 

ROPE DRUM

Drum fabricated with seamless pipe duly machined with flange at both and with roller bearing on both flange. DRUM CAPACITY:- 300/500 meters, WIRE ROPE :- 22mm/24mm

 

REDUCER

1st Stage HELICAL gear box.

2nd Stage Reduction with spur gear and pinion (Size of Gear Box HC 550). Ratio = 1:50

 

MOTOR

TEFC SQ. Cage 20 H.P / 25 H.P Crane Duty Motor 400/415V, 50Hz, 3PH. Class of insulation F, IP- 55 Protection, S4Duty, CDF 40%. No of Start Stop 150 per hour
DRUM & PINION SHAFTMake of EN8 forged steel material.
ROPE SPEED4 – 6 Meters / minutes at last layer OR even more.
BRAKE

Electro hydraulically operated Double shoe thruster brake.

1) Dia of brake:-300mm. OR 2)DIA OF BRAKE:-200

 

COUPLING

Star coupled on motor shaft and input shaft gear box flexible pin bush coupling on out shaft of gear box and input shaft of pinion.

 

CONTROL

The winch is operated by master control with four Steps forward and reverses in slip ring motor. In sq. cage motor is operated by reverse forward pendent push button station.

 

CONTROL PANEL

Control panel suitable for motor provided with contactor, overload relay, amp/volt meter, Push Button for on and off, lamp for incoming supply, HRC fused & Step Down Transformer and control panel is weather proof.
PAINTINGTwo coats of red oxide and enamel Paint.

 

SAFETY FEATURES

Hand operated brake for emergency stop provided. Overload tripping system for motor. HRC fuse, Miniature Circuit Breaker & Step Down Transformer for safety of the operating personal and control panel is weather proof.

15 TON ELECTRIC WINCHES 

15 TON ELECTRIC WINCHES TECHNICAL DATA
MODEL15 TON ELECTRIC WINCH MACHINE

 

BASE FRAME

Fabricated with rolled steel section/plates properly ribbed floored with plate for working area with lifting lugs provided.

Weight=2200 KG, Frame Size = 2050 mm x 2536 mm IS MB Size = 250mm x 125mm.

 

ROPE DRUM

Drum fabricated with seamless pipe duly machined with flange at both and with roller bearing on both flange. DRUM CAPACITY:- 300/500 meters, WIRE ROPE :- 25mm/28mm OR EVEN MORE

 

REDUCER

1st Stage HELICAL gear box.

2nd Stage Reduction with spur gear and pinion (Size of Gear Box HC 550). Ratio = 1:50

 

MOTOR

TEFC SQ. Cage 40 H.P / 50 H.P Crane Duty Motor 400/415V, 50Hz, 3PH. Class of insulation F, IP- 55 Protection, S4Duty, CDF 40%. No of Start Stop 150 per hour CGL/ABB MAKE
DRUM & PINION SHAFTMake of EN8 forged steel material.
ROPE SPEED4 – 6 Meters / minutes at last layer OR even more.
BRAKE

Electro hydraulically operated Double shoe thruster brake.

1) Dia of brake:-300mm. OR 2)DIA OF BRAKE:-200

 

COUPLING

Star coupled on motor shaft and input shaft gear box flexible pin bush coupling on out shaft of gear box and input shaft of pinion.

 

CONTROL

The winch is operated by master control with four Steps forward and reverses in slip ring motor. In sq. cage motor is operated by reverse forward pendent push button station.

 

CONTROL PANEL

Control panel suitable for motor provided with contactor, overload relay, amp/volt meter, Push Button for on and off, lamp for incoming supply, HRC fused & Step Down Transformer and control panel is weather proof.
PAINTINGTwo coats of red oxide and enamel Paint.

 

SAFETY FEATURES

Hand operated brake for emergency stop provided. Overload tripping system for motor. HRC fuse, Miniature Circuit Breaker & Step Down Transformer for safety of the operating personal and control panel is weather proof.